What construction and mining demand that agriculture does not
Construction and mining cabs add two loads to the usual vehicle punishment: continuous shock from unsprung or lightly sprung machines, and dust fine enough to find every seam. The company's application material answers with the same foundations — IP66 in the specifications, MIL-STD-810 vibration and ISO 16750 shock testing named in the specifications, and wide-voltage power — applied to dispatch and digital construction work. It presents the T8 in an excavator application as the in-cab display and control terminal, and its 8-inch T8 and T8 Pro terminals in intelligent dispatch work in open-pit mines.
Dispatch screen, guidance terminal, or both
A dispatch terminal lives on legibility and uptime: job assignments, position and status, readable at a glance over a rough haul road. A guidance terminal adds the machine-control conversation — CAN data, camera views and positioning. The 8-inch models fit compact machinery cabs and carry the standard camera and bus connections; the T10B's larger screen and newer platform suit trucks and machines whose operators work from the screen all shift. Camera channels deserve planning here: blind-spot and bucket views are frequently the difference between a terminal that is tolerated and one that is requested.
- IP66 sealing against site and pit dust
- Vibration and shock testing named across the T-series specifications
- Dispatch, guidance and machine-control roles in one range
- Camera inputs for blind-spot and work-area views
- 9-36 V power for 12 V and 24 V machine fleets
The machinery-cab shortlist
For construction and mining machinery work, the T8 brings a 8" IPS, 1280 x 800, brightness 750 cd/m2 or higher, fully laminated multi-touch and runs Android 10.0 on 64-bit quad-core Cortex-A53 at 1.5 GHz. Its positioning fit is GPS + BeiDou module (N303-5Q); optional built-in centimetre-level RTK positioning module (module model not stated on the product page), and the interface side reads: 23-pin function expansion port; standard expansion set of 1 x camera, 1 x CAN, 1 x RS485, 1 x 100M Ethernet plus power/ACC. That is why it appears in this shortlist: the combination matches the data and connections this work actually uses, in a housing specified for 9-36 V DC input (ISO 7637-II); IP66 sealing; operating temperature -20 to +70 C; MIL-STD-810 and ISO 16750 testing.
For construction and mining machinery work, the T10B brings a 10.1" IPS, 1280 x 800, brightness 750 cd/m2 or higher, fully laminated multi-touch and runs Android 13.0, or Linux kernel 5.15 with QT 5.15 (optional) on 64-bit octa-core Cortex-A55 at 1.8 GHz, GPU ARM G57 MC1. Its positioning fit is GPS + BeiDou module (optional fit); RTK module UM982 or UB982 (optional), and the interface side reads: 26-pin function expansion port; expansion combinations in the T10 family pattern (camera, CAN, RS232, Ethernet — confirm the exact set for your build). That is why it appears in this shortlist: the combination matches the data and connections this work actually uses, in a housing specified for 9-36 V DC input (ISO 7637-II); IP66 sealing; operating temperature -20 to +70 C.
Starting a construction or mining terminal project
Bring the machine list, the dispatch or guidance platform the terminal must run, and the camera count per machine. Confirm the expansion combination for your build and sample units for a site trial — dust and vibration behaviour is best judged on your own machines — then minimum order quantities and lead times.
Ask about terminals for your construction and mining machines
Send your vehicle, software and interface list. The sales team replies with a configuration and price.